Momentary Ground Protection - A Product Guide

Momentary Ground Protection - A Product Guide

Your floors need special protection when undergoing remodeling, during new construction, moving heavy furniture or equipment, and for other occasions past day-to-day use. Protecting flooring is sensible and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can cost hundreds of dollars in replacement and repair costs. This article describes surface protection products for floors as a way to make informed decisions on the perfect product to use for your needs.

Types of Protection Packaging:

Ground protection products are commonly packaged as either:

(1) Products by the roll: These embody widespread adhesive films, rolled paper products and rolled textile protection. Protective supplies purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick as much as forty eight mils thick).

(2) Products by the sheet: These embrace corrugated plastic, masonite, and different inflexible protection. Protective supplies bought by the sheet are commonly measured in thickness by the inch (e.g., 1/4-inch thick) and normally come as 4 feet by 8 feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces but does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can typically depart adhesive residue when removed. Frequent paper protection products embody:

· Ramboard™ A coated compressed paper board 38 mils thick that's breathable, water-proof and made from recycled paper.

· Kraft paper is a lightweight brown paper that's cheap however doesn't afford any impact protection and can simply tear

· Scrim paper could incorporate coatings or reinforcements to make them water resistant as well as scrim threads to bolster the paper and forestall tearing. These improved papers are longer lasting than regular Kraft paper or rosin paper however they are additionally too thin to supply a lot impact protection.

· Rosin paper is thicker than Kraft paper and could be very low cost. Rosin paper is recycled, felt paper that ranges from 9.zero to 11.5 mils thick. The massive drawback of utilizing Rosin paper is that it might cause a permanent stain if the paper gets wet. Rosin paper also can rip easily so it not normally advisable for use

· Corrugated cardboard rolls or sheets may also be used to protect flooring. Corrugate provides impact protection nevertheless it isn't coated with a water-resistant finish and should be stored dry always so that it doesn't disintegrate. Cardboard products are additionally available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.0 as much as 3.5 mils in thickness. They trap any moisture from escaping in order that they shouldn't be used on any flooring which might be curing. Two of the nice benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films don't provide any impact protection and are usually rated for short term use of 30 to 90 days only. Polyethylene films are designed for one-time use and don't use recycled supplies making them a poor choice in maintainable protection. Protection films are available in a variety of adhesion "tack". Hard surface protection films will have a decrease tack and colour than carpet protection which needs a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with a number of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an precise sheet of thin wood. Each plywood and Masonite are sold in the standard dimension of 4 feet by 8 feet and are more expensive per sq. foot than paper or polyethylene products. Masonite is commonly 1/8 or 1/4 inch thick. Plywood is commonly 1/four inch to 3/four inch thick. Each products provide impact protection on a wide range of ground types and provide adequate protection against heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable however they're bulky to hold and store. These wood sheets ought to be used on high of a softer protection similar to a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they forestall wrinkles when rolling heavy loads over the carpet. Plywood and Masonite don't supply moisture protection and may be harder to chop to measurement than different protection types.